Aquion ProFlow, Техническое руководство

Страница: 6 / 52

ASSEMBLY
Page 6
BRINE TANK
Picture 1
11. Move the brine tank to the correct installation location;
position it on a flat and level surface. Make sure to leave
enough space for ease of service.
12. Remove the lid from the brine tank.
13. Run the polytube from the brine valve through the hole in
the sidewall of the brine tank, to the outside of the brine
tank.
14. Insert the polytube into the brine line compression
connection on the control valve (
 ); tighten the nut.
15. Add water to the brine tank to a height of ±10 cm from
the bottom.
16. Add salt to the brine tank.
17. Install the lid on the brine tank.