Aquavolta Water Tractor, Руководство по эксплуатации

Страница: 14 / 40

14 - Connection diagram for the faucet
5
Ventilstellung bei
Wasserhahn-
Betrieb
Ventilstellung bei
Ionisierer-Betrieb
2a
2b
a
b
c
After removing the aerator from the
faucet can an adapter ring, if required,
with a rubber seal be screwed into the
tap (a) and the diverter body (b) is
screwed off.
To seal it, if necessary, can teflon tape
also be used (c).
•
The water flow regulator (4) should be
inserted in between the supply hose (5)
and the ionizer. When in the position 2a
can the faucet be used normally. When in
2b and the cold water is turned on full is
the water pressure diverted to the ionizer.
• Ensure that the outlet hose of the function
water (5) is pointing to the sink.
• When you have checked that all
connections are watertight, then you can
plug the ionizer in (3).
Valve setting
when using the
faucet
Valve setting when
using the ionizer
1. Flexible outlet hose
4. Water flow regulator
2. Diverter valve with aerator
5. Cold water supply hose from the tap to the water ionizer