Aquavolta Water Tractor, Руководство по эксплуатации

Страница: 12 / 40

Connect the ¼ inch hose (1) (delivered white) tightly to
the Tap water inlet on the bottom of the device.
12 - Positioning and preparation of the device
1
2
3
Wet the drilling diagram
stencil with water and
position it parallel to
the wall at the desired
height. Place the nails or screws
at the intended position.
The head should
protrude 1 cm.
Hang the device on the
mount.
You can place the device aptly next to or behind the sink. In case you mount it on the wall use the hanging slits
on the back cover.
The hose can be disconnected if you press the inner ring
that encompasses it inwards (2). Also, rubber drip-stoppers
(3) can be removed like this.
Remove the rubber stopper (red) from the acidic water outlet.
With the thicker delivered hose cover the outlet spigot tightly.
The length of both hoses can be shortened with scissors to the desired
length. Do this before you have connected the device to the water tap or
the angle valve.
Attention:
the acidic water hose should be at least 40 cm long.