Aquavolta Water Tractor, Руководство по эксплуатации

Страница: 13 / 40

13 - The two connection options of the device
With the easiest method is the ionizer connected
to the water tap, as you can see left in the
diagram.
This installation can be carried out by anyone.
Attention: The installation
is not possible with a
diversion from the cold
water tap if the tap is
connected to a low
pressure boiler.
Fitted adapters are usually
supplied by your
distributor.
Send your distributor a
photo of your tap.
In the case of a permanent installation is the water
ionizer connected directly to the cold water supply
with the delivered T-piece.
The acidic water outlet is, in rare cases, diverted to
an acidic water container under the sink. Usually the
outlet hose is placed in the sink.
Attention: The installation
to the angle valve should
be done by a plumber. A
hole has to be drilled into
the kitchen counter and
usually a
¼ inch hose is
attached.
Alkaline
drinking
water
Cold water supply
Electricity connection
T-piece diverter
valve from
the cold
water supply
Acidic
water
container
Alkaline drinking
water
Electricity connection
Acidic water
outlet hose
Flow
regulator
Flow
regulator