Aquatic SERENITY W6AIR6060, Руководство пользователя и инструкция по установке

Страница: 22 / 89

22 Aquatic
Serenity Owner's Manual & Installation Guide
INSTALLATION INSTRUCTIONS
FREESTANDING MODELS
2. To prevent the bath from moving sideways, secure the two
anchoring pins (3/8” x 3” lag bolts, not supplied) to the
floor (see Diagram 4A). Leave the lag bolts 1 1/2” above
floor. Wipe off the marker tracings.
3. Install the overflow and drain on the bath. Cut pipes to
desired length prior to assembly (see Diagram 4B). Glue
the first pipe section (PVC 1 1/2”) of the air passage to
go under the floor and make sure pins are lined up with
holes in tub. Apply a silicone seal under the rim of the base
and lay the bath down putting the pipes through the floor.
Immediately remove any excess silicone.
VARIABLE SPEED
AIR BLOWER REMOTE MOUNTING FOR FREE-
STANDING MODELS:
4A
4B