MINIPACK
X:/Aquatech-Pressmain Instruction manuals/current/MINIPACK
4
3.1
MAINTENANCE AND CARE OF YOUR EQUIPMENT ......................................................... 21
3.2
LEGAL REQUIREMENTS .................................................................................................................. 21
3.3
SERVICE CONTACTS ........................................................................................................................ 21
4.
DISPOSAL .................................................................................................................. 21
EC DECLARATION OF CONFORMITY .................................................................... 22
OPERATING PARAMETERS ........................................................................................ 22
0.0 GENERAL SAFETY INFORMATION
These instructions are intended for the installer/operator/user/maintenance of this equipment and
must be kept with the equipment, for the life of the equipment and made available to all persons. Please
read GENERAL SAFETY INFORMATION 0.0, WARNINGS 0.1 and CAUTIONS 0.2, 0.3 & 0.4 before
doing anything else, and then follow them carefully.
The unit must only be installed/operated/used/maintained by a competent person;
A competent person
is someone who is technically competent and familiar with safety practices and the hazards involved
.
Hydraulic Accumulators/Expansion Vessels installed as part of/in conjunction with this equipment, with
Pressure x Volume above 250 Bar-litres, require regular formal inspection by a
competent person.
This is
a Legal Requirement under the “Pressure Systems Safety Regulations” (PSSR) and the Owner/User
should be made aware of their responsibility for this. (see section 3. Servicing).
Failure to install/operate/use/maintain the equipment as recommended below could cause damage to
the equipment any anything subsequently connected to it, and invalidate the warranty provided by
AquaTech-Pressmain to the buyer.
Any damage caused to the equipment by misapplication, mishandling or misuse could lead to risk of
Electrocution, Burns, Fire, Flooding or injury to people or property
dependent upon the circumstances
involved.
This equipment contains moving/rotating parts that must remain guarded. Removal of or missing
guards could lead to serious personal injury.
This equipment automatically restarts after a power interruption.
We accept no responsibility or liability for any consequences or damage/losses due to misapplication,
mishandling or misuse of the equipment.
It should be noted that the assembly of pressure equipment on site under the responsibility of the user
(or his representative) is not subject to the Pressure Equipment Directive 97/23/EC. (National
legislation covering assembly on site will apply)
The latest version of this instruction manual with up to date safety information can be downloaded
from our website at www.aquatechpressmain.co.uk
