24
LSI/FAH Read Screen
This
screen
displays
the
calculated
values
for Langelier Saturation Index and Free Available Halogen.
LSI:
Current calculated value for LSI
CAL. H:
Value entered for calcium hardness
FAH:
Current calculated value of FAH
For descriptions and information on entering user data, refer to the
relevant Set Screen sections.
Protocol Read Screen
This screen displays the selected protocol mode of the controller.
BD:
115200/9600
MODE:
AQUAGUARD/MODBUS
Slave Addr:
Current address assigned for MODBUS
TX:
Current status of transmit
RX:
Current status of receive
ERR:
Current indication of communication errors
For descriptions and information on setting the protocol, refer to the
section Set Protocol Screen.
For further instructions on the operation of this interface refer to
AquaGuard Brochure and Manual
02/4/#/,"$
-/$%!15!'5!2$
,3)&!(
,3)#AL(
&!(
2
System Configuration
2
System Configuration
Tank Alarm
Tank alarms come in two sizes TANK_ALARM_SM (500mm)
complete with 3m suction tube, drum weight and 3m connection
cable or TANK_ALARM_LG (1000mm) complete with 5m suction
tube, drum weight and 5m connection cable.
Tank Alarms can be configured for closed contact on empty
(default) or open contact on empty. To change, remove circlip from
bottom of Tank Alarm and reverse the float.
Designed for simple installation. Simply cut or drill 25mm hole in
the drum cap, mount the compression gland into the cap, insert
the Tank Alarm through the bottom of the gland, adjust height to
desired depth and tighten compression gland.
For wiring into Tank Alarm Box, refer to diagram on the left.
