AquaPRO 62041, Руководство пользователя

Страница: 4 / 10

4
TOOLS REQUIRED
MATERIALS REQUIRED (NOT INCLUDED)
Discharge tee Pipe
Threaded adapter Elbow
Ball valve Check valve
Union
SPECIFICATIONS
POWER SUPPLY 115V,60HZ,20Amp circuit
LIQUID TEMP. RANGE 32°F to 77°F (0°- 25°C)
DISCHARGE 1in.NPT
SUCTION
1in. NPT
WATER LEVEL 25 ft.
INSTALLATION
CAUTION : Risk of flooding. Be sure that all plumbing and fittings are rated to withstand the system pressure which you
expect the pump to generate.
1. Decide what’s the best place to install the pump. Think about these things:
 it must be near the main water supply line
 the pump must be accessible

the power cord must reach a power outlet
 the controller’s LED lights must be visible

ease of plumbing
 space saving
NOTE : Installation of a low pressure safety cutoff switch on the pump discharge is recommended (and may be required by
your local code) to shut off the power in case of low discharge pressure (caused by broken pipe, etc.).
2. Mount the pump on a solid base in the location you have decided on.
3. Choose a time that will allow you to shut off the water to the household while you install the Pump.
4. Shutoff the main water supply valve to the household.
5. Open any faucet to relieve water pressure in the plumbing. Once the water pressure is relieved, close the faucet.
Phillips
Screwdriver
Flathead
Screwdriver
Thread Tape
Tape Measure
Safety goggles
Pipe wrench
Hacksaw
PVC glue