Before returning to your retailer, call our customer service department at
1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.
2. If desired, anchor the fountain in the pond using a heavy object (such
as a rock) and some string. Cut a length of string slightly longer than
the depth of the pond. Tie one end of the string to the anchor and the
other end to the ring at the bottom of the float. Fig. 3
Fig. 3
3. Place the unit into the water and connect to a proper power source.
Fig. 4
Fig. 4
DISASSEMBLY PROCEDURE
In order to insure optimal operation of the Floating Pump and Filter with UV, the following procedures
should be performed periodically. When the performance of the water flow through the fountain head
is reduced
– it is an indication that cleaning of the unit is needed.
1. Unplug the power cord, and then carefully remove the Floating Pump
and Filter assembly from the pond. Fig. 5
Fig. 5
2. Remove the string from the hook then remove the
pumpshield™ from
floating pump and filter with UV assembly. Clean the
pumpshield™
then install on to the floating pump and filter with UV assembly. Test
the unit and inspect the performance. Fig. 6
NOTE: If the unit performance is still unsatisfactory, unplug the unit
and proceed to step 3.
Fig. 6
GFCI
