Before returning to your retailer, call our customer service department at
1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.
CAUTION
UV light may cause irritation to the skin and/or eyes. Avoid exposure.
DANGER
– ULTRAVIOLET RADIATION – disconnect power before replacing lamp.
Prolonged or repeated exposure to UV light may have adverse physical effects including, severe
damage to your skin and eyes. Seek immediate medical attention for overexposure to UV radiation.
This light assembly has not been investigated for use in swimming pools or hot tubs.
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly: Philipshead screwdriver, string, rock.
OPERATION INSTRUCTIONS
1. Choose a fountain head for the desired water effect, and assemble
your choice as shown in Fig. 1.
Fig. 1
1.
Run the cord through the hole in the bottom of
pumpshield™, then
secure the pump barrier bag to the
floating pump and filter with UV
assembly
. Hang the string to the hook on brace. Fig. 2
Fig. 2
C
D
B
E
E
