The controller features a secondary method to turn the shower off. This
is done using the lever: joggle the lever down until the flow is set to ECO,
then joggle the lever down three more times in succession.
39
Hello
Warming
39
Get
Ready
39
Push Lever
Your
shower was
9:20
Goodbye
Push lever
to power off
water turns off
Switching On and Off
ENDING YOUR SHOWER
Touch the power symbol for approximately 1 second, then push the lever when
prompted, to confirm and end the shower.
STARTING YOUR SHOWER
To activate the controller, use the proximity sensor, or touch the power symbol until
the screen wakes up, then push and release the lever to start the shower. The Get Ready
screen will appear on the display. After a moment the target temperature will flash
until it is reached. It will then display the thermostatically controlled temperature.
water turns on
As a safety feature, the Aqualisa SmartValve
TM
has a maximum run time of
20 minutes. The flow can be stopped and started at any time by following
the instruction on this page.
This can be enhanced by activating and using the free Aqualisa app.
See pages 3 and 15 for details.
6
