Aqualisa iSYSTEM SMART, Руководство пользователя

Страница: 4 / 20

Single Outlet Controller
1. Turn the temperature dial to the required setting.
2. Press the Start/Stop button on the controller to turn the shower on.
3. The temperature can be adjusted during water flow by turning the bezel.
4. The red and blue LED display will flash until the selected temperature has been
reached. When the LED display is constant, your shower is ready to use.
5. Press the 'Boost' on the controller to increase the flow of the shower when
desired. To turn 'Boost' off, press the `Boost' button again at any time.
N.B. The strength of the `Boost' button will vary depending on the water system
pressure and the configuration of the pipework. For further information, see
the Important Information section in the main product (Aqualisa SmartValve™)
installation guide.
6. Press the Start/Stop button on the controller to turn the shower off.
As a safety feature, the Aqualisa SmartValve™ has a maximum run time
of 20 minutes. The flow can be stopped and started at any time by
pressing the ‘Start/Stop’ button.
This can be enhanced by activating and using the free Aqualisa app.
See pages 3 and 9 for details.
START/STOP TEMPERATURE
Adjust before
or during shower
BOOST
Increase flow rate
during shower
4