Axis Digital concealed
installation instuctions
page 10
Mount the template to the
wall in the required position
ensuring vertical alignment
using a spirit level to facilitate
if necessary. Carefully mark
the two fixing holes. Check
the intended position for the
rail assembly before removing
the template, then drill and
prepare suitable wall fixings
for the two mounting screws.
8
The maximum distance from the top fixing to the ceiling is
detailed on the template. If there is coving or an alternative
obstruction then this distance must still be accounted for.
!
Fix the top wall bracket to the
appropriate position using the
screws provided if suitable
ensuring that the arrow on the
bracket is facing upwards.
9
Fix the bottom wall bracket to
the appropriate position using
the screws provided if suitable
ensuring that the arrow on the
bracket is facing downwards.
10
Before mounting the rail to
the wall ensure that both the
hose restraint and the handset
holder are positioned. Offer
the assembly up to both the
wall brackets before pushing
it home.
11
Insert the fixing bolt into
the rail end cap and secure it
to top bracket using a 4mm
Allen key. Repeat for the
bottom bracket.
12
