19
User Manual S200 WCS
Update August 2021
6 Access and display
6.1 How to use menus
All settings are accessible via a menu. Changing a defined value (for example).
Note:
This manual includes all available menu items. Depending on the selected code (see
the specific “Codes” paragraph), all menu items cannot be displayed, and/or, all menu
items cannot
be selected.
6 . 1 . 1 C o d e s
There are 3 access levels to provide access using codes that protect the device from
unauthorized operation.
A) Code A - 00: all entries are locked, except codes B, C and D
B) Code B - 15: user code
C) Code C - 55: maintenance code
D) Code D - NN: code for factory service
6.2 LCD dis play adjus tments
6 . 2 . 1 C o n t r a s t a d j u s t m e n t
From the general menu, SERVICE sub-menu then, display setting:
■■■■■■□□□□□□□□□□
↕→
Contrast. adjust.
■■■■■■■■■■□□□□□□
Backlight
The contrast level of the LCD display can be adjusted.
Note:
It may not be possible to adjust the contrast too high or too low.
Please adjust the contrast as follows:
Press the key in, keep it in while pressing to increase contrast.
To decrease contrast, press the
key while pressing
at the same time.
This function may need to be adjusted after a factory reset.
ESC
ESC
