AquaLabo SMARTLOG, Руководство пользователя

Страница: 11 / 74

Smartlog
- 11 -
4.2 OVERVIEW OF THE SMARTLOG
EXTERIOR:
The Smartlog has 3 connectors on the rear panel. They have been printed on to clearly identify them:
Computer connection (COM)
Optional antenna connection (your Smartlog may also have an internal antenna)
Sensor connection (I/O)
IMPORTANT
If your Smartlog is fitted with an external antenna, never try to have the Smartlog send and receive if the antenna is
not connected to the product.
The product’s sealing is only guaranteed if its cover is locked to the stop and all unused connectors are covered
with their properly tightened cap.
The Smartlog comes with a base fitted a fastening screw (3 mm diameter) or a magnet .
You can separate the Smartlog from its base. To do this, hold the Smartlog turned over (connectors facing you) so as to see the fasteners connecting
the Smartlog to its base.
Hold the base firmly and turn the Smartlog clockwise until it is released from its base.
Do the reverse to lock the Smartlog on its base.
A
B
C
D
E
D
E
A B C
F
F
F