AquaKing RED LABEL 2, Руководство пользователя

Страница: 31 / 34

• www.aquakingredlabel.nl • info@aquaking.nl
31
Replacing the Drum Mesh (Illustration 3)
If you notice that the mesh (S) is showing wear and tear, it is essential that the mesh be
replaced. This is to ensure optimal performance from your drum filter and prevent any
damages otherwise.
• Disconnect the power supply and ensure all pipes are closed off.
• Ensure that the water in the filter can be drained.
• Rotate the drum (R)until the fastening strip (U) and hose clamps (V) are facing upward.
• Loosen the hose clamps (V).
• Unscrew the screws (W) from the fastening strip (U).
• The mesh should now be loose can be replaced.
• Refasten the fastening strip (U) with the screws (W).
• Refasten the hose clamps (V).
• Check that all is tighten and secured.
• Place the filter lid (M) back on the filter.
• Reconnect the power supply and hold the button (Q) in for 10 seconds. The motor and
high-pressure pump are reactivated.
If in doubt always consult your dealer or an experienced professional.
EN