Aquacal Leisure Temp LT1000, Руководство по установке

Страница: 11 / 72

Page - 8
(Leisure Temp LT1000)
1.4 Plumbing
1.4.a Plumbing Requirements
NOTICE
Failure to heed the following may result in damage to equipment.
l
Do not use glue on the threaded portion of the equipment’s unions. A glued-in-place union will prevent the
equipment from being properly winterized.
l
The heat pump must receive water flow within the specified minimum ranges under worst-case conditions such as
a fouled water filter.
l
Failure to provide clean filtered water to the heat pump can void the product warranty.
l
Water flow exceeding maximum flow rates will negatively affect the total pool filtration performance and may
damage the heat pump. This will not be covered under the equipment warranty.
See " Water Flow Rates " on
page 13.
l
Install a bypass valve whenever water-flow may exceed the maximum rating.
l
See " Bypass Valve Kit (# STK0135) " on page 67.
l
For additional guidance testing water flow rates, please contact Leisure Temp.
l
A safety-enhancing "Over Temperature Alarm" kit is strongly recommended for all spa applications.
1
-
Ins
ta
lla
tion