background image

6. PRECAUTIONARY ACTIONS

1.

Use   the   device   is   posible   only   indoors.   Keep   the   device   away   from   direct
sunlight. Do not use the device near explosive substances or sources of heat. Do
not place health dangerous objects onto the device.

2.

IT  IS  ALLOWED  TO   CONNECT THE   DEVICE   TO  THE   NETWORK   ONLY
AFTER   FILLING   ITS   CONTAINERS   WITH   WATER.   OPERATION   OF   THE
DEVICE  WITHOUT  WATER  IN   CONTEINERS  OR  WITHOUT  WATER   IN  A
BOTTLE IS NOT ALLOWED.

3.

It is not necessary cooling and heating buttons to be always turned on. Turn them
off for energy saving. 

4. If you do not use the device for a long time turn it off, unplug the power cord out of

an outlet and drain the remaining water through the drain hole.

5. Do not use organic cleaning agents. It is strictly forbidden to pour water over the

device. 

6.

Never turn the device upside down and do not tilt it no more than 45°.

7.

 At the time when the device is being operated under normal conditions, the water
in the cooler should not freeze. If the dispenser is covered with ice, turn off the
cooling mode for 4 hours and turn on it again. If the cooler is covered with ice
again, turn off the device and consult a specialist (if the dispenser has a cooling
function). 

8. After turning off the device turn it on no earlier than 3 minutes. 

Содержание YL1345S-B



















Отзывы: