© 2014 New Aqua LLC dba Aqua Systems • 7785 East US Hwy 36 • Avon, IN 46123
13
Eradicator II AIF Systems
Installation, Operation,and
Maintenance Manual
Programming
Set Time of Day
:
Note:
If a softener is installed or existing after the AIF, it is
recommended that the regeneration time for the softener
be set at a time after the AIF regen.
If there is any question or concern about this setting,
contact our authorized dealer for assistance.
If the power goes out, the current time will
remain correct as long as the battery has
sufficient charge (up to 2 years). If the battery
expires, the screen will state “Low Battery”.
The battery should be replaced and the time
reset. All other programming will be retained.
Note:
Return to
Normal Operation
1. Press “SET CLOCK”
2. Current Time (hour): Set the hour of the day using “Up” or “Down”
buttons. AM/PM toggles after 12. Press “NEXT” to go to step 3.
3. Current Time (minutes): Set the minutes of the day using “Up” or “Down”
buttons. Press “NEXT” to exit Set Clock. Press “REGEN” to return to
previous step.
Displayed when battery
voltage is low.
Display alternates with pre-
viously selected display.
The Energy Saver function manages the display backlight in the Gen II control. A new option is avail
-
able on the newly enhanced circuit boards. The new option is Energy Saver / AUTO. This new feature
combines the benefit of the Energy Saver, that turns the backlight off when buttons are not in use, but it
will activate the backlight when a User Alert Screen is triggered. Red Screen User Alerts, which include
Salt Monitoring, Service Alarm and Error Screens will activate the Display light, and keep it on until the
Alert condition is cleared.
New Energy Saver Feature for 2013 with Gen II Enhanced Electronics:
Содержание Eradicator II AIF
Страница 40: ...2014 New Aqua LLC 2 2014 Rev 1...
