Aqua Phase
, A Division Mid-State Stainless Inc. ●
330
W.
Benson Ave. ●
PO Box 228 ●
Grantsburg, WI 54840 ●
USA
800-208-9274 ●
715-463-5851
●
FAX: 715-463-5853
● Email: [email protected] ●
WEB: www.aqua-phase.com
Immediately
:
•
Press the “STOP” button.
•
Shut off the water supply.
Possible Causes/Solutions:
1.
DOOR NOT PROPERLY CLOSED.
2.
FRONT DOOR GASKET DAMAGED OR WORN.
•
Inspect Front Door Gasket for wear or damage.
•
Replace if necessary—you may order replacement parts my calling your dealer or
the
factory.
3.
EXCESS BUILD-UP OF HARD WATER DEPOSITS ON HIGH-LEVEL FLOAT
SWITCH
•
Unplug the Aqua Phase from the power supply.
•
Locate the High-Level Float Switch in the Water Reservoir, inside the Wash
Chamber.
**Inspect High-Level Float Switch to ensure that it is free of debris and moves freely.
4.
DAMAGED OR DEFECTIVE HIGH-LEVEL FLOAT SWITCH
•
Unplug the Aqua Phase from the power supply.
•
Inspect the High-Level Float Switch for damage, such as a cracked fitting or
binding.
•
Replace if damaged—
you may order replacement parts by calling your dealer or
the
factory.
•
Drain Hose end is submerged in water. (Water is syphoning back into the Aqua
Phase).
5.
FILL VALVE HAS DEBRIS STUCK IN IT.
•
See “Valve Inspection Procedure”.
•
Remove the Fill Hose from the fill line connection at the Aqua Phase. Check that
the
filter screen/washer is in place and intact.
•
If problem remains, call the factory for assistance.
AQUA PHASE
W
ILL NOT STOP
FILLING
/
ERROR MESSAGE:
Fill Time Expired