Aqua Phase,
A Division Mid-State Stainless Inc
. ●330 W Benson Ave. ●PO Box 228 ●Grantsburg, WI 54840 ●
USA
800-208-9274
●715
-463-
5851●FAX: 715
-463-
5853●
Email:
●WEB:
Message One
Run mode selected
.
Doors closed.
Ready to start.
Message Two
Drain mode selected
.
Doors closed.
Ready to start.
Message Three
Machine is filling for wash cycle.
Run mode selected.
Doors closed.
"Start" button pushed.
Message Four
Machine is in Wash Cycle.
Machine done filling for wash
cycle.
Detergent solution automatically
injected.
Wash cycle will be for length of
time selected (3,5, or 7
min
)
CONTROLLER INFORMATION
Message Five
•
Wash water is being drained.
OR
•
Drain mode selected and
"Start" button pushed.
Machine is done with wash cycle.
Message Six
Machine is beginning Rinse cycle.
•
Wash cycle complete
•
Wash water drained.
Machine is filling with fresh water
for Rinse cycle.
Message Seven
Message Eight
- Option
Message Nine
Disinfectant Application S
ystem Running
•
Fresh water being mixed with disinfectant
solution.
•
Item in Wash Chamber being sprayed with
solution.
1.
"Clean & Disinfect" Selected before wash
cycle started.
Wash & Rinse cycle done.
2.
"Disinfect Only" selected & "Start" button
pushed.
Message Ten
Machine is in rinse cycle.
Machine done filling for
-----
rinse cycle.
Rinse solution
automatically
injected.
Rinse cycle will be for
approximately 1.5 minutes.
Machine has completed selected
operation.
Front door of Wash Chamber must
be opened before next operation can
begin.
•
Item removed/loaded.
•
Wash Chamber inspected for
debris.
•
Saftey switches operational.
**After Wash Cycle, prior to start of the
draining of wash water.**
Check low level float.
•
Check that the low-lecel float is
free of debris.
•
Check if low level float is
operating properly.
Call technical support if this does not
solve problerm
12