2
water level
7
They are also provided with multiple outlet
options.
1. Duckbill or multi directional outlet: allows the
water to be channelled a variety of different
directions. Good for providing water flow to
static areas of the aquarium, thus reducing
waste build up.
2. Venturi: for injecting bubbles into the
aquarium. The venturi adjuster allows the water
to air ratio to be adjusted by the user.
3. A 19mm barbed hose tail is also provided
with the 1300 series pump. This can be used for
running devices such as protein skimmers.
2300, 3600 and 4900 series pumps are
dedicated sump pumps. They are provided with
19mm and 25m barbed hose tails. They can be
used for many other purposes such as running
external filtration devices or simply circulating
water.
The 360, 480 or 1300 series Morays can be
mounted in 2 different ways and used for a
variety of applications. All 3 models come with
uplift pipe adapters enabling them to be used
as an alternative to air driven systems on under
gravel filters. Refer to the “know your pump”
section at the front of this instruction booklet for
part identification.
1. Remove the top motor cover and the strainer.
2. Remove the 4 suction cups.
3. Insert the hang mount into the 2 holes at the
strainer end of the motor
4. Place the top motor cover and the strainer (If
being used) back into position.
1. Remove the strainer and slide the base plate
out towards the impeller.
2. Slide the hang mount into the groves at the
back of the pump.
3. Replace the strainer. (If being used)
Pump Installation
Attaching the hang bracket 380/480 series
Attaching the hang bracket 1300 series
water level
