background image

This  appliance  is  not  intended  for  use  by 

children  or  infirm  persons  without  supervi-

sion.  Young  children  should  be  supervised 

to  ensure  that  they  do  not  play  with  the 

appliance. 

Warning:  To  guard  against  injury,  basic 

safety  precautions  should  be  observed, 

including the following:

1.  Read  and  follow  all  safety  instructions  before 

using this appliance.

2.  Danger:  To  avoid  possible  electric  shocks, 

special  care  should  be  taken  since  water  is 

employed in the use of aquarium equipment. For 

each  of  the  following  situations  do  not  attempt 

repairs  yourself.  Return  the  appliance  to  an 

authorised service facility for service or discard the 

appliance.

a) If the filter head falls into water, do not reach for 

it,  unplug  it  and  then  retrieve  it.  If  the  electrical 

components of the appliance get wet, unplug the 

appliance immediately (non immersible equipment 

only).

b)  If  the  filter  shows  any  sign  of  abnormal  water 

leakage,  immediately  unplug  it  from  the  power 

source.

 

c)  Carefully  examine  the  filter  after  installation.  It 

should not be plugged in when there is water on 

parts which are not intended to be wet.

d) Do not operate any filter if it has a damaged cord 

or  plug,  or  if  it  is  malfunctioning,  or  dropped  or 

damaged in any manner.

A “drip loop” (See the diagram) should be arranged 

by the user for each cord connecting an aquarium 

component to a receptacle. The drip loop is the part 

of the cord below the level of the receptacle or the 

connector if an extension cord used. It is used to 

prevent water traveling along the cord and coming 

in contact with the receptacle.

If  the  plug  or  receptacle  does  get  wet,  do  not 

unplug the appliance. Disconnect the fuse or circuit 

breaker that supplies the power to the appliance, 

then unplug and examine for presence of water in 

the receptacle.

3.  Close  supervision  is  necessary  when  the 

appliance is used by or near children.

4. Always unplug the filter from the electrical outlet; 

when  not  in  use,  before  putting  on  or  taking  off 

parts, before any type of maintenance, or cleaning.

 Never yank the cord to pull it from the outlet. Grasp 

the plug and unplug to disconnect.

5. Do not use the filter for reasons other than the 

intended use. The use of attachments that are not 

recommended  or  sold  by  the  filter  manufacturer 

may  cause  the  product  to  be  unsafe.  This  is  not 

recommended.

6. Do not install or store the filter where it will be 

exposed  to  weather  or  temperatures  below 

freezing.

7. Make sure any component mounted on a tank is 

securely installed before operating it.

8. Read and observe all the important notices on 

the filter.

9. Ensure input voltage is the same voltage as your 

local power supply. 

10. If an extension cord is necessary, a cord with a 

proper rating should be used. Care should be taken 

to arrange the cord so that it will not be tripped or 

pulled.

11.  A

  G.F.C.I

  (Ground  fault  circuit  interrupter)  & 

surge  protector  is  recommended  for  all  electrical 

appliances.

12.  Ensure  your  hand  is  dry  when  turning  the 

power  switch  on/off  and  when  inserting/removing 

the power cord from the receptacle. 

13.  If  you  are  in  any  doubt  about  the  electrical 

installation  or  safety  of  this  product  you  must 

consult a qualified electrician.

For Guarantee Conditions, please refer to 

the Guarantee form that is enclosed with 

this product.

Drip loop

Important Safeguards

Содержание AQUIS 1000

















Отзывы: