Installation
21. Repeat steps 19 to 22 for the outlet.
22. Place the suction caps on the spray bar or
duck bill then attach it to the back or side of the
aquarium. Fig 11
23. You are now ready to start your filter.
METHOD 1
NOTE:
Your aquarium must be filled with water
to prime your filter. Ensure both taps are in the
on position by shifting the plastic lever from the
OFF
(Horizontal position) to the
ON
(Vertical
position).
NOTE:
Once the filter is running,
double check the fittings and seals for water
tightness. Fig 1
Fig 10
Fig 1
Fig 11
Starting Your Filter
On Off
1. Temporarily detach the outlet from the tubing.
Either the Spray Bar or the Duck Bill. Fig 2
2. Place your mouth over the end of the outlet
and create siphon effect by sucking on the tube.
Fig 3
3. Once the siphon begins, lower the outlet tube
into a bucket. Fig 4
4. Now wait until the siphon continues to fill the
canister and eventually overfill into the bucket
via the outlet pipe.
5. The filter is primed when the intake pipe and
filter is completely filled with water.
Fig 2
Fig 3
Fig 4
