17
Failures
Failures may arise if the relation between sucked air and water is not in the right range. The
reasons could be:
-
There is no foam at all or the foam is that dry that it doesn’t get pushed into the collection
cup:
-
air injection nozzle is clogged, quantity of air is insufficient
-
water flow is too low
A temporary stop of the foaming power is normal if there aren’t any foam-forming substances in
the water anymore.
-
The skimmer foam is too strong, foam is too wet:
-
Water flow is too strong.
3.3. Carbon filter
Carbon filter Homarus
Fig. 5:
1) Inlet of PF 1000 2) Outlet 3) Sealing clamp 4) Sealing (no pict.)
For opening the carbon filter, turn the pump PF 1000 off and remove clamps.
