Aqua Lung SEA LV2 Скачать руководство пользователя страница 6

Страница: 6 / 32

SEA MK / LV2 Technical Manual

Remove the back-up ring (24), o-ring (25), brass washer

(26) and Teflon washer (27) from the stem (28).

Check Bonnet

NOTE: It is possible that some or all of these parts have

remained in the bonnet (21).

10.

Remove the o-ring (23)

from the bonnet (21).

11.

Insert the squared end of

the stem (28) into the seat &

disc retainer (29) and unscrew

it from the first stage body (8).

13.

Remove the pressure gauge (36) using a 7/8” crowfoot

and flex wrench. Remove o-ring (32) from the pressure gauge.

Crown

12.

Using a magnifier, inspect

the condition of the seat &

disc retainer crown inside the

first stage body (8). There

should be no scratches, nicks

or dents on the crown seating

surface.

CAUTION:

Be careful not to damage the fill port (33) with

the wrench while removing the pressure gauge (36).

Using the 3/4" socket and flex wrench, unscrew the bonnet

(21) from the first stage body (8). Pull the stem assembly out

of the bonnet.

Unscrew the handwheel retainer (15) using the modified

screwdriver. Remove the handwheel washer (16), spring (17)

handwheel (18), nylon washer (19) and indicator ring (20)

from the stem (28).

Disassembly of Handwheel

NOTE: SEA units will either have a dial pressure gauge

(36) or pin style pressure gauge (37). Identify which

type the SEA being serviced utilizes and follow the

instructions accordingly.

Disassembly of Dial Pressure Gauge

Disassembly of Pin Style Pressure Gauge

14.

Use the valve handle retainer tool to remove the pin

pressure indicator (37) from the first stage body (8). Remove

o-ring (32) from the pressure indicator body (38).

Содержание SEA LV2

































Результаты поиска

Содержание SEA LV2

Отзывы:

Бренды по названию

Популярные бренды

Aqua Lung SEA LV2, Техническое руководство

Результаты поиска

Содержание SEA LV2

Отзывы:

Бренды по названию

Популярные бренды