Aqua Lung i750TC, Руководство пользователя

Страница: 30 / 79

Doc. 12-7852-r05 (8/5/16)
30
DIVE SURFACE MODE
© Aqua Lung International, Inc. (2016)
TRANSMITTERS
The i750TC can use up to 3 transmitters to monitor gas supplies. The TMT Menu allows for the
programming of the wrist unit to receive the signals from selected Aqua Lung transmitters. See the
Dive Mode Features section (p. 23) for further information on transmitters.
You can scroll up or down to select the TMT (transmitter) you want to modify. The transmitters
have the option of ON, OFF, or SET. When a transmitter is highlighted a transmitter status mes-
sage will be displayed. Initially, the message will be "SEARCHING." Once connected to the Trans-
mitter the gas pressure and transmitter battery status will be displayed.
Selecting the SET option will take you to another screen where you can enter the serial number/ID
code for the transmitter.
NOTE: If the TMT is set OFF for the active gas, the letters SPG will be displayed in place of
a pressure reading on the Main Screen.
NOTE: Transmitter 2 cannot be set to ON unless transmitter 1 is set to ON. Likewise, tran-
mitter 3 cannot be set to ON unless transmitter 2 is also set ON. If you attempt to do so, the
i750TC will display the message TMT 1(2) MUST BE SET ON FIRST.
SELECT
ADV MODE
to select or
save option
to scroll up
or toggle
selection
transmitter status
message
to scroll down
or toggle
selection
exit menu
SELECT
ADV MODE
to decrease
value
transmitter code, active digit
highlights and flashes until saved
to increase
value
exit menu
to save each
digit setting
NOTE: The serial number
can be located in two places
directly on the transmitter (see
below).
SERIAL #