Aqua Lung i750TC, Руководство пользователя

Страница: 28 / 79

Doc. 12-7852-r05 (8/5/16)
28
DIVE SURFACE MODE
© Aqua Lung International, Inc. (2016)
SELECT
ADV MODE
DIVE MENU
To plan dives, set gases, transmiters, alarms, and change other settings you must navigate through the Dive
Menu. Enter the menu by pressing the MODE button. Press the SELECT button to choose options from the Dive
Menu. All Dive Menu options will be discussed in the order they appear in the menu below.
exit menu
step back
SELECT
ADV MODE
to select
an option
to scroll
up
to scroll
down
PLAN
This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface
intervals, the programmed gas mix, and PO
2
alarm setting. Either NO DECO (No Decompression) or O
2
MIN limits
are displayed, depending on whether nitrogen or oxygen levels will be the limiting factor. The time limit will display
as 1-99 minutes, all times greater than 99 display as ">99".
NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 min-
ute allowed dive time will not be displayed.
SELECT
ADV MODE
to exit
to decrease
depth
to increase
depth
current PO
2
Alarm
setpoint, blank if
FO2 is Air
% O
2
, current
FO
2
setpoint
No Decompression
or O2 MIN
Maximum
Operating
Depth