Aqua Lung i300C, Руководство пользователя

Страница: 7 / 67

Doc. 12-7874-r06 (11/27/17)
7
GETTING STARTED
© Aqua Lung International, Inc. (2017)
BASICS
Welcome to your new i300C. The i300C is an easy to use dive computer utilizing a two button interface. Divers
may choose between three modes of functionality consisting of Dive, Gauge, and Free Mode. Though the i300C
is easy to use, you will get the most out of your new i300C if you take some time to familiarize yourself with its
displays and operation. Information has been organized into easy to follow sections to aid you in learning all you
need to know. There is also a glossary at the end of this guide for any terms that may sound unfamiliar.
ACTIVATION
To activate the i300C, press and release either button. The i300C will also turn on if its metal contacts become
wet. The H2O ACT (water activation) feature may be disabled if that is your preference. Disabling the H2O ACT
feature is described in the Dive Surface Mode chapter, p. 16.
• Upon activation The unit will enter a Diagnostic Mode. The i300C checks the display and voltage at this time to
ensure that everything is within tolerance.
• It will also check ambient barometric pressure, and calibrate present depth as 0 m (ft). When at 916 m (3001 ft),
or higher, it will adjust depth for the higher altitude.
• After the Diagnostic check, the i300C will display the surface screen in Dive Mode.
NOTE: The i300C has no off button or command. If no buttons are pressed or dives made within 10
minutes the computer will enter Sleep Mode. The screen and Bluetooth (if set ON) shut down, to save
battery life, while in Sleep Mode. To wake the computer press any button. Additionally, the unit will
completely shut itself off after 2 hours of inoperation. However, the i300C will stay on, in Sleep Mode,
for a 24 hour period after the dive, counting down FLY (time to fly) and SAT (desaturation time) if a dive
has been made.