Aqua Lung Enforcer, Руководство пользователя

Страница: 8 / 20

8
ENGLISH
REPAIRS
REPAIRING A HOLE IN A WATERPROOF BREATHABLE MATERIAL (continued)
3. Using a standard household clothing iron, set it to medium heat (no steam!). Using
the rubbing alcohol swab thoroughly clean/scrub the breathable material area around
the hole. Clean the heat patches: Give the smooth film side of the base patch and the
matt grey side of top patch a good wipe with the alcohol swab. Tip: if the hole is small,
circle it with pencil for easy identification while working on your drywear.
4. Place the base patch over the hole (paper up/smooth film down). Cover the base
patch and your drywear fabric with parchment paper before applying heat. Take heated
iron and apply pressure. Keep the iron moving in a circular motion. In 10 to 20 seconds
the film will liquefy (you will see evidence of this through the parchment paper).
5. Remove the iron and carefully peel away the paper backing. Take care not to burn
fingers. The adhesive must have melted into the woven fabric “tricot” layer to act as an
effective bonding layer for the top patch.
6. Take the top patch and lay it over the base layer, matte grey side down. Rim of
exposed base layer of top patch is cut smaller. Lay the sheet of parchment paper over
the top patch and heat for 10 to 20 seconds. Apply pressure and keep the iron moving
in a circular motion. Remove heat and parchment paper. Let patch cool. Your drywear
is now ready for use.
1 2 3 4