Aqua Creek PRO SPA 40, Руководство по сборке

Страница: 7 / 21

7
SPA LIFT USERS (MANUAL-ROTATE)
Now take the handheld controller and press the “up” arrow at the top of the controller. The lift
should start to move up smoothly. Continue holding the “up” arrow button until you have
cleared the pool/spa wall. Once the user has cleared the pool/spa wall vertically, it will be
necessary for an assistant to manually rotate the user over the pool/spa. This may be done by
pushing the seat arm and seat until the seat arm begins to rotate. Once the user is located above
the pool/spa, press the “down” arrow to lower the user into the pool/spa. Release the “down”
arrow button once you have reached the desired depth.
Now release the lap belt by tugging gently on the top flap of the lap belt. Lift up the flip-up arm-
rest and exit the seat into the pool/spa. The handheld controller can simply rest on the seat arm
when you are not using the lift. If desired, you can send the lift chair up and out of the pool/spa
so that the chair is not a hindrance while you are in the pool/spa. If this is desired, you must
keep the controller in an accessible location in order to call the lift back. The attendant/assistant
should stand bye in case you need to get out of the pool/spa quickly.
When you are ready to return to the lift seat and exit the pool or spa, make sure that the chair is
lowered (submerged) sufficiently to allow you to easily slide into the chair. You will not want to
attempt to “lift” or raise yourself into the chair. Position your legs onto the leg-rest (if equipped
with leg-rest). Next, re-secure the adjustable lap belt snugly around your waist. Now take the
handheld controller and apply pressure to the “up” arrow. Maintain pressure on the up button
until the lift has cleared the pool/spa wall vertically. It will now be necessary for an assistant to
push the seat arm until it rotates over the deck at the desired exit position. Press the “down
arrow” until the lift comes to a stop. Finally, release the safety belt, flip up the arm rest, and exit
the chair.
OPERATING INSTRUCTIONS SPA LIFT LEG REST
NOTE : CHECK ALL NUTS & BOLTS FOR TIGHTNESS AND FOR WORN PARTS
BEFORE EACH USE
If your lift is equipped with a pullout leg-rest it will be
necessary to have the leg-rest engaged in the extended position
with the leg-rest flipped up for pool/spa walls higher than 36”.
For pool/spa walls shorter than 36”, the leg-rest may be
flipped up or down. To extend the leg-rest, simply pull the
leg-rest out to the desired position. Next, grip the front of the
leg-rest, and flip it up so that the leg rest is in the horizontal
position, as shown in figure 4. The leg-rest plate should then
“lock” into place. To disengage the leg-rest, simply lift the
leg-rest plate until you feel it slip out of the locked position,
then allow the plate to fall into the lowered position. Finally,
push the leg-rest back into the seat tube until it reaches a stop
in the “stowed away” position.
NOTE: It will be necessary for an assistant to operate the
lift. Figure 6