Aqua Creek PRO SPA 40, Руководство по сборке

Страница: 4 / 21

4
INSTALLING THE LIFT
1.) Once the anchors have been installed, you can now install the lift. Position the lift over
the anchors as shown in figure 2.
2.) Using the supplied hardware, secure the lift to the deck as shown in figure 2.
3.) Attach the supplied safety belt to the chair by opening each end of the belt and looping
the ends through the slots on either side of the chair as shown in figure 2. The Velcro
ends can be adjusted to suit the users’ needs.
4.) Attach the handset control plug at the base of the control box. Press firmly until plug is
fully seated in the control box. Attach the fully charged battery pack to the control box
as shown in figure 2 below. The battery should “snap” into place.
FIGURE 2