Aqua Creek PRO SPA 40, Руководство по сборке

Страница: 9 / 21

9
BATTERY SYSTEM OPERATING INSTRUCTIONS
CONTROL BOX HANDHELD
CONTROLLER
The Spa and Pro Spa Battery system come with a 24v sealed rechargeable battery, wall mount
charging unit (with mounting bracket), control box, and a waterproof handheld controller. The
control box is mounted to the lift
and
has a plug-in socket for the actuator, the rotate motor (Pro Spa)
and the handheld controller. The battery mounts directly above the control box with a quick-release
clip.
To operate the lift, plug in the handheld controller to the control box and push the corresponding
button to raise, lower or rotate the unit. The lift should be able to complete approximately 10-20
full cycles before the low battery indicator tone will sound. The low battery tone indicates that
there is approximately 20% battery life remaining. At this point, DO NOT ATTEMPT TO
OPERATE THE LIFT, remove the battery from the unit and recharge on the wall mounted charging
unit.
To recharge the battery, simply grip the top of the battery and depress the clip on the back of the
battery. This will unclip the battery from the control box bracket and the battery can then be
clipped into the wall mount charger. When the
charger is plugged in the green ON light will
illuminate. When the battery is correctly mounted to the charger, the orange CHARGE light will
illuminate. When the battery is fully charged, the CHARGE light will GO OFF and the battery is
ready for use.
WHEN THE BATTERY IS NOT BEING USED IT SHOULD BE STORED ON THE
CHARGER AND NEVER ON THE LIFT. DO NOT LEAVE THE BATTERY ON THE
LIFT WHEN THE LIFT IS NOT IN USE.
WALL MOUNT
CHARGER
24 V SEALED BATTERY