FARBWERK NANO
sponding sliders in the color selection are identified by a drop symbol. This feature
can be used to blend and mix colors where overlapping LED controllers are con-
figured.
10.8.
10.8.
10.8.
10.8. Sound controlled effects
Sound controlled effects
Sound controlled effects
Sound controlled effects
Sound controlled effects can be used to visualize the current audio output of the
computer. A warning in the LED configuration area will notify you if audio analysis
has been disabled in the aquasuite. In this case, please enable the feature in the
general aquasuite configuration. The general aquasuite configuration can also be
used to modify existing audio filters and define custom audio filters.
10.9.
10.9.
10.9.
10.9. AMBIENTpx effect
AMBIENTpx effect
AMBIENTpx effect
AMBIENTpx effect
The AMBIENTpx effect replicates the border area of the current monitor content on
the configured LEDs. This effect is meant to be used with LED strips installed to the
rear of the monitor for background lighting. A warning in the LED configuration
area will notify you if video analysis has been disabled in the aquasuite. In this
case, please enable the feature in the general aquasuite configuration.
For each configured AMBIENTpx effect, please select the correct monitor, edge
and desktop range to evaluate for the effect.
Prerequisites and limitations:
●
The AMBIENTpx effect requires Microsoft Windows operating system version
8.1 or newer.
●
Screen content preventing analysis by DRM or similar methods cannot be
analyzed.
●
Multi monitor setups must be configured using standard procedures of the
operating system. Special features of the graphics card driver like “NVIDIA
Surround” or “AMD Eyefinity” must be disabled.
●
AMBIENTpx is not available while “NVIDIA G-Sync” is active.
11.
11.
11.
11. Profile management farbwerk nano
Profile management farbwerk nano
Profile management farbwerk nano
Profile management farbwerk nano
Select “Profiles” from the device list below the “farbwerk nano” entry.
The profile management can be used to select up to four profiles manu-
ally or automatically. In order to use this functionality, LED controllers
must be assigned to the individual profiles as described above.
11.1.
11.1.
11.1.
11.1. Manual profile selection
Manual profile selection
Manual profile selection
Manual profile selection
Select the profile to be activated by clicking the corresponding button.
11.2.
11.2.
11.2.
11.2. Automatic profile selection
Automatic profile selection
Automatic profile selection
Automatic profile selection
The active profile can automatically be selected depending on sensor readings, a
timer or depending on running applications. A variety of conditions can be config-
© 2019-2020
Aqua Computer GmbH & Co. KG
- 15 -
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
