FARBWERK NANO
For each software sensor, a scale factor and an offset may be configured for ma-
nipulation of the displayed sensor value. Data from third party software regularly
requires the scale factor to be adjusted.
10.
10.
10.
10. RGBpx configuration
RGBpx configuration
RGBpx configuration
RGBpx configuration
Select “RGBpx” from the device list below the “farbwerk nano” entry.
In the RGBpx overview, select the RGBpx output.
After selecting the RGBpx output, new LED controllers can be added. Po-
sition and number of assigned LEDs can be modified for existing LED controllers,
multiple assignments and controller settings can be modified. Each LED controller
can be activated or deactivated for each of the four available profiles as well.
10.1.
10.1.
10.1.
10.1. Create and configure additional LED controllers
Create and configure additional LED controllers
Create and configure additional LED controllers
Create and configure additional LED controllers
After selecting the RGBpx output, new LED controllers can be added by
clicking the plus symbol. Alternatively, use the right mouse button and se-
lect “New” from the context menu. Select the desired effect from the su-
perimposed list of available effects. The controller name can be altered from its
default as well. Confirm you selection by clicking the check symbol in the lower
right corner.
The configuration of the newly added LED controller can be modified in the lower
area of the window. Each LED controller can activated or deactivated for each of
the four available profiles as well. Most effects offer extensive customization op-
tions such as color selection or speed adjustment. Additionally, many effects can
be configured to modify effect parameters depending on current sensor data.
In total, up to 20 LED controllers can be configured.
10.2.
10.2.
10.2.
10.2. Modify existing LED controllers
Modify existing LED controllers
Modify existing LED controllers
Modify existing LED controllers
Existing LED controllers can be selected by clicking the corresponding col-
or bars, the configuration of the selected controller can then be modified
in the lower area of the window. Each LED controller can be activated or
deactivated for each of the four available profiles as well.
By clicking the gear symbol, the effect to be displayed can be changed and the
controller name can be altered. Confirm you selection by clicking the check sym-
bol in the lower right corner.
© 2019-2020
Aqua Computer GmbH & Co. KG
- 13 -
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
