AQUAERO 5/6
the aquasuite program folder. Execute the program without options to display
syntax and examples.
Precondition to overwriting an output value is that the output has to be as-
signed to a controller. Only values exceeding the controller output will be ac-
cepted from the command line tool. In order to be able to use the full output
range of 0 % to 100 %, the controller assigned to the output should be a
“Preset value” set to 0 %. Output values set by the command line tools will
remain active until the aquaero is restarted.
24. Basic settings (aquasuite)
24. Basic settings (aquasuite)
24. Basic settings (aquasuite)
24. Basic settings (aquasuite)
Click the entry „Settings“ below the headline „aquasuite“ to access basic set-
tings for language, units and start-up of the software.
24.1. Language
24.1. Language
24.1. Language
24.1. Language
Select a language from the drop down menu. After changing the language
setting, the software will have to be restarted.
24.2. Units
24.2. Units
24.2. Units
24.2. Units
Select the units to be used for temperature and flow values from the drop
down menus. After changing these settings, the software will have to be
restarted.
24.3. Application start-up
24.3. Application start-up
24.3. Application start-up
24.3. Application start-up
You may customize start-up behavior to suit your preferences. You may also
select to hide the task bar symbol of the software when minimized.
24.4. Service administration
24.4. Service administration
24.4. Service administration
24.4. Service administration
The service (background service) synchronizes date and time of all aquaero
5/6 devices connected to the PC and provides software sensors to the
aquaero.
- 44 -
Aqua Computer GmbH & Co. KG
© 2014
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
