Fumes and gas exhaust hose reel
16
13.1 Replacing hose (spring reel)
Note:
It is advised to have two (2) technicians to perform hose replacement on the MAXIREEL hose
reel. AQC will not be held responsible of hose reel operation if customer does not replace defective
or damaged hose with identical new hose. Technicians or qualified personal will need to work from
a safe raised platform if hose reel is installed at ceiling height.
Safety note:
Proper gear such as harnesses and hard hats should be be worn as per OSHA safety
standards if technicians need to work in an elevated area.
DO NOT OPERATE REEL UNTIL STEPS LISTED BELOW HAVE BEEN COMPLETED.
1.
Lower flexible hose completely off the reel.
2 .
Lock hose reel with ratchet lock system. Remove hose reel drum cover. Safety note: It is
recommended to use vise-grips on drum sheaf # 4, front and back of the hose stop bar #4.
3 .
Continue steps 3 to 15 on motorized reel version.
14 ELECTRICAL CONNECTIONS
Note:
Because of the wide variety of possible electrical connections with exhaust fans, proximity
switches, etc, AQC will supply appropriate drawings as per selection. If reels are equipped with
side mounted control panels, electrical diagram are pasted in the cover of the panel.
14.1 Wall mounted motorized reel UP / DOWN / STOP control switch wiring
connection
Note:
Pendant UP /DOWN /STOP switch is factory installed to hose reel