Fumes and gas exhaust hose reel
14
12 ADJUSTMENT & FUNCTIONALITY
For motorized reels equipped with radio signal controls ONLY.
Note on wireless transmitters: Each hose reel has his assigned remote transmitter pre-set at the
factory. UP/DOWN limits are also pre-set at the factory.
Hose reel is factory set for a safe and proper use of hose length contained on hose drum. To readjust
or modify the limit switches, refer to step by step procedure listed below. Regular operation of the
wireless remote is performed from the ground but for UP/DOWN setting results, it is best to have
the transmitter no more than 6" (1,8 meter) from the hose reel and aimed at the hose reel.
To assign a new or a replacement transmitter with a definite hose reel:
1 .
Push the UP and DOWN buttons on the transmitter simultaneously and release the buttons
after the hose reels jogs briefly up and down indicating the transmitter is now linked to the
hose reel tube motor integrated receiver.
2 .
Press the STOP/MY and UP or DOWN buttons simultaneously depending on which setting
you need to do first. When the flexible hose has reached the desired maximum UP or DOWN
position, release pressing the buttons. Additional minute adjustments may be performed by
pressing the DOWN or UP position that was selected to start with.
3.
Proceed with UP or DOWN other settings using the same procedure as in step 2 mentioned
above.
4 .
Press the programming button on the back of the transmitter to confirm and lock settings.
To modify or re-adjust the UP/DOWN limit switches:
1.
Press the STOP/MY button only. Hose reel will jog briefly indicating it is ready for programming.
2 .
Proceed with steps 2, 3 and 4 mentioned above.
PUSH
UP
PUSH
DOWN
UP
STOP
DOWN