APV UD 100 M1, Руководство по эксплуатации

Страница: 5 / 28

Page 5
Figure 1: Counter plate
4 Mounting of the spreader
Layout and mode of operation
The UD 100 M1 is a universal spreader with a capacity of 105 litres.
The spread rate is regulated by the seeding shaft, which is driven by a 12V gear motor. The working
width is regulated comfortably from the driver's seat via the speed of the spreading plate.
As an option, there is the possibility of adjusting the speed of the seeding shaft to the speed of the
tractor by using various speed sensors (available as an accessory). Furthermore, tractor linkage sensors
are also available as an option.
Power can be supplied to the control box either through the 3-pin standard socket or optionally directly
from the battery.
Mounting the implement
The spreader should be attached to the vehicle, either
"facing" towards the front or the rear. A steel plate is
riveted onto the frame, which you can bolt on with the
standard supplied counter plate on different parts of the
machine.
To mount the implement on the three-point linkage of
the tractor, bolt the tractor linkage drawbar between your
spreader and the supplied counter plate (Figure 1). To
attach the spreader, you should use at least 8 bolts with
a diameter of 10 mm and the required length to ensure
secure and firm attachment of the implement. Then
install the supplies top link bracket onto the frame of the
spreader.
CAUTION!
APV is not liable for improper mounting or faulty use of the implement.