APV UD 100 M1, Руководство по эксплуатации

Страница: 12 / 28

Page 12
Figure 12: Loosen the nut from the bolt
2.
Loosen the nut marked in Figure 12 from the bolt (WAF 7) and pull out the bolt.
3.
Reinstall the motor cover on the spreader.
Calibration test / Regulation of the seed rate
The speed of the seeding shaft depends on the spread rate and the forward speed when operating with
sensors. To determine the desired spread rate, you should perform a calibration test before beginning
work.
The spread rate is calculated with the following formula:
Desired spread rate [kg/ha] x forward speed [km/h] x working width [m] = Weight
[kg/min]
600
Example:
Figure 11: Remove the 1 bolt
[kg/min] 1,2
600
[m] 12 [km/h] 12 [kg/ha] 5
=
× ×