APV UD 100 M1, Руководство по эксплуатации

Страница: 24 / 28

Page 24
•
Lock the track markers in transport position!
•
When filling the hopper with slug pellets or similar toxic agents, only fill as much as is needed in the
near future. Protective clothing, safety gloves, and face and eye protection must be worn during the
filling procedure.
•
Observe the warning information provided by the manufacturer on the packaging. The seed grains
used in your spreader can be toxic!
•
Always keep hands, clothing etc. away from rotating parts!
•
Keep your distance when the implement is switched on!
•
No other persons may be in the hazard area of the universal metering unit with spreading disc.
•
Visual check by the driver!
•
Never look into the spreading cone!
•
Product remains should be returned to the original packaging. Residues must not be released into
the environment.
•
Authorised crop protection products are not known to have negative effects on the materials of the
implement.
•
Maintenance, repair, and cleaning work as well as the elimination of malfunctions should always be
performed when the drive is switched off and the motor is at a standstill!
•
When mounting the spreading device, the operator must connect it to the tractor or vehicle with a
metal connection and if necessary, a grounding cable.
•
Never look into the radar sensor!
•
The operating manual calls for the use of CE-marked exchangeable universal joint shafts as well as
their covers!
•
Some parts have stickers warning about high temperatures. When working on these parts when they
are hot, safety gloves must be worn. Dust deposits on the hydraulic motor must be prevented. Clean.
•
The motors of the rotary valve / seeding shaft and spreading plate can get hot. Warning stickers are
applied on the motors. The operator must check the motors regularly for changes in temperature and
remove any accumulated dust.
•
The operator must ensure that no one is in the vicinity of the universal metering unit when it is being
moved by the tractor's hydraulic system for use of the spreading disc. Visual check by the driver.
When driving on roads, the operator must ensure that the raised universal metering unit cannot be
lowered (stop valve in the tractor hydraulic system or similar). Moreover, when driving on roads, the
controller must be switched off by the user (no accidental starting up of e.g. the spreading disc).
Mounted implements
•
Before mounting and dismounting implements on the three-point linkage, move the operating devices
into the position that excludes unintentional lifting or lowering!
•
When mounting, the operator must ensure that the requirements for the tractor or agricultural
implement specified in the operating manual are met and that the connections specified in the
operating manual are made correctly.
•
When mounting the universal metering unit, the operator must ensure that there is a metallic
connection made to the tractor or agricultural implement.
•
For three-point mounting, the mounting categories of the tractor and the implement must match or be
adapted!
•
There is a risk of injury due to crushing and shearing points in the area of the three-point linkage!
•
Do not stand between the tractor and the implement when actuating the external controls for the
three-point mounting!
•
When the implement is in transport position, always ensure that the tractor three-point linkage is
sufficiently locked to the sides!
•
When driving on roads with the implement lifted, the operating lever must be locked against lowering!
•
To check the procedure, the operator must have a view on the mounted universal metering unit or on
the agricultural implement on which it is mounted, as well as hazardous movement zones.
•
When performing work procedures and when the spreading disc is used, the tractor's speed must
maintained between 1 and 20 km/h, as specified in the operating manual and depending on the
seed.