Tranlation of the original operating manual
Page 17
10.4 Tine safety
As a standard, the GK series is equipped with a tine safety
by means of a rope. It protects the tines so that they do
not get lost on the pasture or on the field. This also
prevents damage to other implements, e.g. the mower or
the baler.
Fig. 10
10.5 Repairs and service
In case of failure or damage to the Grassland Combi, please contact the manufacturer. The contact
data can be found in chapter 3.
11 Information on nature conservation and environmental
protection
Reduction of noise pollution during use
Any loose parts (e.g. chains) should be attached to prevent unnecessary noise.
Energy-efficient use
The tines of the Grassland Combi should not penetrate into the soil deeper than necessary. By
doing so, the towing vehicle is not unnecessarily strained and fuel can be saved.
Recyclable raw materials during disposal
Many parts of the Grassland Combi are made of steel or spring steel (such as the frame, tine
section, tines, ...) and can be accepted and recycled by a waste disposal plant.
12 Technical data
Type designation:
GK 400 M1
Mode of operation:
Levelling with leaf springs with wear plate
2 rows of aggressive round spring tines
Pressure-adjustable reconsolidation
Working width:
3.98 m
Transport width:
4.13 m
Dimensions (with seeder) (H x W x D):
1.71 m x 4.13 m x 1.82 m
Dimensions (without seeder) (H x W x D):
1.31 m x 4.13 m x 1.82 m
Working depth:
0 to 40 mm
Number of tines [ø12 mm / ø10 mm]:
55
