APV 1.2, Руководство по эксплуатации

Страница: 5 / 16

5
Quality for Professionals
2.2 Electrical connection
The standard supplied cable can be
directly connected to the 3-pin standard
socket of the tractor in the cab. The other
end is connected to the control box.
The fuse (25 A) is located on the right side
of the control box.
Stow the excess cable in the driver's cab to
avoid pinching.
TIP: If your tractor does not have a standard socket, it can be fully retrofitted with the
complete cable set for power socket, tractor retrofitting, 8-m long (item no. 00410-2-
022) (accessory).
IMPORTANT INFORMATION:
The 12 volt power supply must NOT be connected to the socket for the cigarette
lighter!
CAUTION: If these instructions are not observed, damage may be caused to the
control box!
CAUTION: If your battery is charged by a charger that is in "Start" operating mode,
there can be voltage peaks! These can cause damage to the electrical system of the
control box if it is also connected when the battery is being charged!
1 6-pin connector: connection to the
seed drill (implement cable)
2 3-pin connector: connection to the
battery (power cable)
3 25 A fuse
Fig.: 2
1 2 3
Fig.: 3