APT MHC 5, Руководство по безопасности и эксплуатации, Страница: 13 / 20

MHC 5
13 (doc no.)
SAFETY & OPERATING INSTRUCTIONS
Data plate
Made in Bulgaria
F
D
C A
B
G
E
H
A. Maximum permitted hydraulic oil flow
B.
Machine type
C.
Maximum relief valve setting
D.
The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E.
Serial number (is also stamped in the valve
housing).
F.
The CE symbol means that the machine is
EC-approved. See the EC declaration which is
delivered with the machine for more
information.
G. Year of manufacture.
H.
Maximum nominal operating pressure
Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
EHTMA category
The machine is clearly marked with EHTMA
categories. It is important that any power source
used is in a compatible category. If any doubt,
consult an authorised supervisor.
Safety label
RPM label
Installation
Hoses
For connection on the machine, the hydraulic hose
must be approved for a working pressure of at least
160 bar (2300 psi) and have a 12.7 mm (½ in.) inner
diameter. To resist exterior wear and tear, we
recommend using a 2-layer hydraulic hose. The
machine connection marked P (pump) is the oil inlet,
and the connection marked T (tank) is the oil outlet.
Always connect both hoses and make sure that all
hose connections are tight. Never carry the machine
by the hose.
13 3392 5192 90a | Original instructions
Safety and operating instructions COR 5, 15