APT MHC 5, Руководство по безопасности и эксплуатации, Страница: 11 / 20

MHC 5
11 (doc no.)
SAFETY & OPERATING INSTRUCTIONS
►
If the machine has a silencer, check that it is in
place and in good working condition.
► Always use hearing protection.
►
Use damping material to prevent work pieces
from 'ringing'.
Maintenance, precautions
WARNING Machine modification
Any machine modification may result in bodily
injuries to yourself or others.
►
Never modify the machine. Modified machines
are not covered by warranty or product liability.
►
Always use original parts, insertion tools, and
accessories.
►
Change damaged parts immediately.
►
Replace worn components in good time.
CAUTION Hot insertion tool
The tip of the insertion tool can become hot and
sharp when used. Touching it can lead to burns and
cuts.
► Never touch a hot or sharp insertion tool.
►
Wait until the insertion tool has cooled down
before carrying out maintenance work.
WARNING Insertion tool hazards
Accidental engagement of the start and stop device
during maintenance or installation can cause serious
injuries, when the power source is connected.
►
Never inspect, clean, install, or remove the
insertion tool while the power source is
connected.
Storage, precautions
♦ Keep the machine and tools in a safe place, out
of the reach of children and locked up.
11 3392 5192 90a | Original instructions
Safety and operating instructions COR 5, 15