APS EPM205-MRS, Техническое описание

Страница: 18 / 47

EPM205-MRS - Technical reference - Preliminary Page 18
Advanced Printing Systems
5. OPERATING CONTROL CODES
Control codes are non-printable characters or sequences of characters that control the operation of the
printer. Within the following description, a control code causes the printer to interpret the following byte
as part of a command and not as a printable character.
5.1 Control codes cross reference
Setup and Hardware control
Command Description
GS / n Set printing speed / Maximum peak current
GS s n1 n2
Set maximum print out speed
GS a n
Set acceleration smoothing
GS D n
Set print Intensity
ESC @ Resets printer
ESC v Send printer status
ESC I Send printer identity
ESC S Puts the printer in sleep mode
ESC A n
Set Auto-sleep time
GS B n
Serial Communication setting
GS b n Set parallel port Busy line hold time
GS P n1 n2 Set paper feeding length
Text and General commands
Command Description
ESC % n
Select internal Character Set
ESC R n Select international character Set
ESC 2 n Set line pre-spacing
ESC 3 n Set line spacing
ESC SP n
Set character spacing
ESC b n
Set inverse video printing
ESC c n Set maximum number of columns
ESC C n Set text justification
ESC ! n Set print mode
ESC { n Set/reset Rotated character
LF
Line feed
CR
Carriage return
ESC J n Feed paper (n dot lines) forward
ESC j n Feed paper (n dot lines) backward
CAN Cancel print data buffer (text mode)