ALTENERGY POWER SYSTEM INC.
15
Version
：
4.1
5.3 Configuration
Configure the inverter parameters. Click “Parameters”, input the parameters in
each box, click “Save”. Then click “Parameters” to view the result in a few
minutes. As shown below (the “Configuration” web page is only 3.0 version and
later contains):
Click “GFDI”, select the check box, then click “Clear GFDI”. The GFDI flag of
inverters will be cleared soon.
Click “Remote Control”, select “Turn On” or “Turn Off” check box, then click
“Turn On/Off” to turn on or turn off inverters. The inverters will be turned on or
turned off soon. You can also click “Turn on all inverters” or “Turn off all
inverters” to turn on or turn off all inverters.
