ALTENERGY POWER SYSTEM INC.
4
Version
：
4.1
2)
Wall Mounting
·
Mount the ECU in a cool, dry, indoor location.
·
Use two drywall screws or wall anchors to affix the ECU to the wall
mounted at the dimensions shown. The maximum screw head diameter
is 0.35’’. Use #8 screws (not included in kit). Affix ECU to the wall with
two drywall screws or wall anchors same as the indication as below .
The maximum diameter of a screw head is 0.35’’. We recommend to use
#8 screws (not included in kit).
·
Slide the ECU onto the mounting screws, aligning the ECU screw holes
with the screws installed in step 2. Lower the ECU onto the screw posts
to secure the unit to the wall.
Install the ECU Cable Connections
The following diagram is a guide for the connections on the back of the APS ECU.
Power interface Serial port Network port USB interface Reset
·
Connect to Internet
Option 1: LAN connection - use the LAN Cable to connect ECU to a
Broadband Router.
Plug the Ethernet cable into the network port on the ECU, and plug the
other end into a spare port on the broadband router or LAN.
Option 2: WiFi connection – use WiFi bridge to connect ECU to a
Broadband Router.
130mm
