ALTENERGY POWER SYSTEM INC.
10
Version
：
4.1
4.0 Basic Operation
The APS ECU has one two-line, 40-character LCD display with alphanumeric. Set
the mode using a single button.
4.1 Power Up
As soon as the ECU is plugged into an AC outlet, it will power up and display
several information on screen. The ECU will be ready to work less than in five
minutes after powering up. The ECU has completed booting up and has started
normal operation when it displays the following information:
Initialization Interface:
Work Started Interface:
The V3.8 indicates the firmware version from which the ECU’s operation and
features are dictated. After the ECU receives an IP address and establishes an
Internet connection, the ECU will contact a Network Time Protocol (NTP) server
so that it can set an accurate local time.
Normal Work Interface:
The number 12 indicates the number of panels to which the ECU is connected.
The symbol “!” following the number 12 indicates that the number of
micro-inverters connected to the ECU doesn’t match the number programmed
into the ECU.
Searching V3.8
192.168.2.101
192.168.2.101 +Web
750W 11kWh 12
Loading…
