Aprotech GOLUB 45 Series Скачать руководство пользователя страница 86

Страница: 86 / 105

APROTECH GmbH

Rathsbergstrasse 17

90411 Nuremberg / Germany

Trade register:

Nuremberg HRB 23727

USt.-Id-No.: DE 256 058 089

D-U-N-S: 31-260-0530

phone: +49 911 / 65 00 79-50

fax:

+49 911 / 65 00 79-79

eMail: [email protected]

Web: www.aprotech.de

Managing Director:

Peter Jung

Industrial Panel- and Box-PCs

Chapter 5

OS Support and Driver Installation

5.1 Operating System Compatibility

GOLUB 45xx only has driver support for Windows 10 64-bit. For Linux support, please use Linux

kernel versions no later than 4.10. The following list contains the operating systems which have

been tested in APROtech.



Microsoft Windows 10 IoT 2019 LTSC Value



Microsoft Windows 10 Professional 64-bit RS5



Ubuntu 18.04.1 LTS* (4.10 kernel)

NOTE:

* For Linux system, user may need to manually compile and install the driver for AMD Vega

graphics or Intel® I350-AM4 GbE controller if the driver is not embedded in kernel. You can visit

AMD website for further information.

ÀPROtech may remove or update operating system compatibility without prior notice. Please

Содержание GOLUB 45 Series










































































































Результаты поиска

Содержание GOLUB 45 Series

Отзывы:

Aprotech GOLUB 45 Series, Руководство пользователя, Страница: 86 / 105

Результаты поиска

Содержание GOLUB 45 Series

Отзывы: